Core Wire Insulation Extrusion Machine

Model NO.: XJ30
Motor: Siemens
Precision: High Precision
Inverter: Yaskawa
Color: Blue
Trademark: NEWTOPP
Transport Package: PE Film + Wooden Box
Specification: CE SGS
Origin: Dongguan City, China
HS Code: 8479400000
Model NO.: XJ30
Motor: Siemens
Precision: High Precision
Inverter: Yaskawa
Color: Blue
Trademark: NEWTOPP
Transport Package: PE Film + Wooden Box
Specification: CE SGS
Origin: Dongguan City, China
HS Code: 8479400000
                Core Wire Insulation Extrusion Machine
1.Application:Core Wire Insulation Extrusion Machine

 Used for insulation conductor single layer / sinlge-layer+ stripping insulation extrusion  
2. Machine Features:
1) Used Widely: Used in hign-speed conductor insulation extrusion/ single-layer+color injection extrusion.
2) High productivity: Optimize the design of screw, make it durable, chromeplate non worn down, non conglutination, color-change quickly, high speed, high output.
3) High quality: Concentricity:over 93%; OD tolerance:±0.005mm.
4) Temperature control precise: Adopted SCR power controller or solid-state relay(SSR) , with imported high-quality temperature control table and copper casting heater,temperature zone of machine controlled within ±1ºC.
5) Operate easily: Exclusive adopt NEWTOPP Teflon specialized touch screen, both provide Chinese/English operation interface, auto-control and auto-feedback, operate easily.
6) Save place: Intergrate  accumulator, capstan, take-up, meter-counter,sparker etc. the total length can be limited within 20M.

3. Technical Parameters
Model  XJ-30  XJ-40 XJ-50 XJ-60
Pay-off type   Passive / active type shaftless pay-off
Pay-off bobbin Φ300-400mm Φ300-400mm Φ400-500mm Φ400-500mm
Screw diameter Φ30mm Φ40mm Φ50mm Φ60mm
Screw L/D ratio 26:1 26:1 26:1 26:1
Extrusion output  35kg/h  45kg/h 60kg/h  80kg/h
Main power 7.5HP 10HP 15HP 20HP
Wire specification AWG36-30 AWG32-26 AWG30-24 AWG28-20
Cooling device U-type single-layer water trough
Accumulate length 0-200m 0-200m 0-200m 0-200m
 Capstan power 3HP 3HP 3HP 5HP
Max speed 400m/min 50000m/min 600m/min 800m/min
Take-up type Double shaft Double shaft Double shaft Double shaft
Take-up bobbin Φ400-500mm Φ400-500mm Φ500-630mm Φ500-630mm
Size( mm) 20000*1500*2100 20000*1600*2100 20000*1700*2100 23000*1800*2103
Total Weight 4.0T 4.5T 5.0T 6.0T
4. Brand of main parts:
1) Motor: Siemens
2) Inverter: Yaskawa 
3) Bearing: NSK, NACHI, ASCHI
4) Electric components: Omron 
5) PLC controller: Siemens


 5. About us
     Dongguan NewTopp Electrical Machinery Co.,Ltd is a high-tech enterprise which specializes in developing and manufacturing wire and cable machines, and our main products includes all kind of extrusion production line, single twisting machine, double twisting machine, cantilever stranding machine, cage-type twisting machine, planetary cabling machine, triple-core stranding with back-twist and taping, and single layer/double layer taping machine etc. and our products have passed CE certification and SGS audited , and we also have passed ISO9001:2008.
6.FAQ
1) Are you a manufacturer or trading company?
  We are a manufacturer with more than 10 years manufacturing exprience in cable machinery, 
2) How can we get to your factory to see the machines works?
Address: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China. 
Only 40 minutes by car from Shenzhen Baoan International airport to NEWTOPP factory;
Only 1.5 hours by car from Guangzhou Baiyun Airport to NEWTOPP factory; 
Only 17 minutes by high speed rail from Guangzhou south station to Humen.                 Core Wire Insulation Extrusion Machine
1.Application:Core Wire Insulation Extrusion Machine

 Used for insulation conductor single layer / sinlge-layer+ stripping insulation extrusion  
2. Machine Features:
1) Used Widely: Used in hign-speed conductor insulation extrusion/ single-layer+color injection extrusion.
2) High productivity: Optimize the design of screw, make it durable, chromeplate non worn down, non conglutination, color-change quickly, high speed, high output.
3) High quality: Concentricity:over 93%; OD tolerance:±0.005mm.
4) Temperature control precise: Adopted SCR power controller or solid-state relay(SSR) , with imported high-quality temperature control table and copper casting heater,temperature zone of machine controlled within ±1ºC.
5) Operate easily: Exclusive adopt NEWTOPP Teflon specialized touch screen, both provide Chinese/English operation interface, auto-control and auto-feedback, operate easily.
6) Save place: Intergrate  accumulator, capstan, take-up, meter-counter,sparker etc. the total length can be limited within 20M.

3. Technical Parameters
Model  XJ-30  XJ-40 XJ-50 XJ-60
Pay-off type   Passive / active type shaftless pay-off
Pay-off bobbin Φ300-400mm Φ300-400mm Φ400-500mm Φ400-500mm
Screw diameter Φ30mm Φ40mm Φ50mm Φ60mm
Screw L/D ratio 26:1 26:1 26:1 26:1
Extrusion output  35kg/h  45kg/h 60kg/h  80kg/h
Main power 7.5HP 10HP 15HP 20HP
Wire specification AWG36-30 AWG32-26 AWG30-24 AWG28-20
Cooling device U-type single-layer water trough
Accumulate length 0-200m 0-200m 0-200m 0-200m
 Capstan power 3HP 3HP 3HP 5HP
Max speed 400m/min 50000m/min 600m/min 800m/min
Take-up type Double shaft Double shaft Double shaft Double shaft
Take-up bobbin Φ400-500mm Φ400-500mm Φ500-630mm Φ500-630mm
Size( mm) 20000*1500*2100 20000*1600*2100 20000*1700*2100 23000*1800*2103
Total Weight 4.0T 4.5T 5.0T 6.0T
4. Brand of main parts:
1) Motor: Siemens
2) Inverter: Yaskawa 
3) Bearing: NSK, NACHI, ASCHI
4) Electric components: Omron 
5) PLC controller: Siemens


 5. About us
     Dongguan NewTopp Electrical Machinery Co.,Ltd is a high-tech enterprise which specializes in developing and manufacturing wire and cable machines, and our main products includes all kind of extrusion production line, single twisting machine, double twisting machine, cantilever stranding machine, cage-type twisting machine, planetary cabling machine, triple-core stranding with back-twist and taping, and single layer/double layer taping machine etc. and our products have passed CE certification and SGS audited , and we also have passed ISO9001:2008.
6.FAQ
1) Are you a manufacturer or trading company?
  We are a manufacturer with more than 10 years manufacturing exprience in cable machinery, 
2) How can we get to your factory to see the machines works?
Address: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China. 
Only 40 minutes by car from Shenzhen Baoan International airport to NEWTOPP factory;
Only 1.5 hours by car from Guangzhou Baiyun Airport to NEWTOPP factory; 
Only 17 minutes by high speed rail from Guangzhou south station to Humen.

Automotive Interior Plastic Injection Mould includes automotive dashboard Plastic Injection Mould, automotive interior console plastic injection mould, automotive A, B, C pillar mould, automotive air conditioner plastic mould, automotive seat plastic injection mould and all other interior plastic accessories mould.


Automotive Interior Plastic Injection Mould Automotive Interior Plastic Injection Mould

Automotive Interior Plastic Injection Mould Automotive Interior Plastic Injection Mould



FAQ:


Q1: What tolerances can you achieve for Automotive Interior Plastic Injection Mould?


There is not a given set of tolerances that fits all processes and materials. In every case, the final tolerances on your part will depend on a number of factors, including but not limited to:

  • Part size
  • Design geometry
  • The number, type, and size of features
  • Material(s)
  • Surface finish
  • Manufacturing process

We will review your design and provide a design for manufacturing review, pointing out any areas where we may not be able to achieve your desired tolerances. It`s helpful to us if you can specify which areas in your design have critical tolerances that must be met and which can be slightly modified if needed to reduce time and costs involved.


Q2: How do you ensure your Automotive interior plastic mould quality?  

In order to deliver high-quality parts every time, we`ve instituted the following steps to ensure you get parts that meet and exceed your expectations.


  • A full design for manufacturing (DFM) review upon initial inquiry. This will be performed by our skilled engineering team, who will alert you to any issues before work begins.
  • All incoming material (metal and plastic) is 100% inspected using our in-house metrology equipment.
  • In-process and first article inspection.
  • Comprehensive final inspection with a full report.


Q3: Is the lead time in working days or calendar days?     

Lead times are quoted in working days. As per our terms and conditions, quoted lead times commence only after completion and confirmation of design for manufacturing review and the beginning of actual production.


Q4: How long does a quotation take?    

In most cases, we respond within a couple of days of receiving an RFQ. However, there may be situations when we must source material from an external supply and therefore the quotation may be delayed accordingly.


Q5: What is the difference between a multi-cavity mold and a family mold?    


A multi-cavity mold has multiple cavities of the same part; a family mold produces a set. For instance, for an electronic enclosure, you may need a front, back, battery door, and a button. Those could all be molded at once in a family mold.


Q6: How long does it take to build an Automotive air conditioner injection mold?


Depending on complexity and our tool room load, it can range from 2 to 12 weeks.


Q7: Can I modify the mold after the first run?    


We can modify our steel molds by additional machining, fill-in welding, welding in additional material, or inserting a replacement feature, for a reasonable cost. If the changes are too great, however, producing a new mold may be more cost-effective than reworking the existing one.



Automotive Interior Plastic Injection Mould

Automotive Interior Plastic Injection Mould,Automotive Interior Trim Parts,Plastic Car Dashboard,Plastic Car Air Conditioner

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com